2 datasets found

These datasets and maps present the landslides observed and landslide susceptibility of the Chimanimani and Chipinge Districts of Zimbabwe. The maps provide a qualitative assessment of the likelihood of a landslide occurrence in an area depend on the terrain condition, and knowledge of prior landslides in the region. These maps have been prepared with the recording of 20 000 landslides, that have been identified in the region, particularly those as a result of the Cyclone Idai that occurred in 2019.

OpenLISEM is an open-source hydrological model suited for the simulation of floods, flash floods and erosion events. The following sections provide an overview of the results from the OpenLISEM model used in the exposure mapping A 30x30m flood map (maximum flood height) for the BuPuSa region was developed for several points on the intensity-frequency-duration curve. This curve represents the extreme value analysis (EVA) for the rainfall across the BuPuSa area. Based on 50 years of historic rainfall data from TAMSAT the EVA is developed for a 1000 year period. From this different rainfall intensities area taken which are referred to at the return period. The statistical possibility of a certain rainfall intensity to happen once in X many years. Flood maps were developed for the following return periods: 1/2, 1/10, 1/50, 1/100 and 1/1000. In addition to 5 different return periods, two different scenarios were modeled. A short high intensity rainfall event that typically causes flash floods, and a longer term lower intensity rainfall event that typically causes fluvial (river) floods. These events were represented by respectively a 6h rainfall event and a 14 day rainfall event. As a result 10 different flood maps were developed.